Supreme Epoxy
Home About Us
Services
Floor Coatings
Service Areas
Resources
Contact Call (437) 239-1165 Get a Free Quote

Epoxy Garage Floors in Mississauga

Flake polyaspartic garage floors for Mississauga homes, installed in one day by the Supreme Epoxy crew from our base on Lakeshore Road East.

Why epoxy

Benefits of a Coated Garage Floor

Salt, Oil and Chemical Resistance

Road salt, de-icers, oil and automotive fluids remain on the surface of the coating and can be cleaned off before they stain or damage the concrete.

One-Day Installation

Most single and double garages are ground, repaired, coated and sealed in one working day.

Slip-Resistant Finish

Flake texture and a properly specified topcoat provide traction when the floor is wet from snowmelt.

Low Maintenance

A sealed, seamless surface is easy to sweep and mop, and stops bare concrete from shedding dust onto vehicles and stored items.

Conceals Wear and Marks

Multi-tone flake blends conceal tire marks, dirt and minor imperfections that are visible on bare concrete.

Extensive Colour Selection

Choose from a wide range of flake blends and solid colours. Samples are reviewed on site during your assessment.

Supreme Epoxy on the set of Holmes on Homes: Building a Legacy
As seen on TV

Featured on Holmes on Homes: Building a Legacy

Supreme Epoxy was part of the team on Season 2 of Holmes on Homes: Building a Legacy. In the episode Fighting Future Floods, our crew waterproofed the homeowners’ single car garage with a Basalt & Schist Flake Polyaspartic System.

See the Project

Garage Floors in Mississauga

Mississauga is home to Supreme Epoxy. Our shop is on Lakeshore Road East, so site visits and installations across the city are straightforward to schedule, from Port Credit and Lorne Park to Erin Mills, Meadowvale, Churchill Meadows and Streetsville. Garage floors are a large part of the work we do here, alongside commercial and industrial projects across Peel Region.

Most Mississauga garages we see are attached double garages with entry steps into the house, and many have years of road salt damage at the door and in the tire paths. Our standard 3-coat flake polyaspartic system covers the floor and one or two concrete entry steps, with stem wall coating available as an addition, and most garages are completed in one working day. Request a free estimate or book your package online.

Grey flake polyaspartic garage floor with slat-wall storage by Supreme Epoxy
Double-Car Garage | Flake Polyaspartic System with Slat-Wall Storage

See our Mississauga epoxy flooring page for commercial and industrial work in the city.

How the System Is Built

Each layer of the system has a specific function. Omitting a layer or applying it below the specified thickness is the most common cause of garage floor failure.

1

Ground and Repaired Concrete

Diamond grinding opens the surface for bonding. Cracks, pits and spalls are filled and levelled so the coating is installed on a sound slab.

2

Epoxy Moisture Vapour Barrier, Where Required

If the slab has moisture issues, an epoxy moisture vapour barrier (MVB) base coat is applied first. It controls moisture coming up through the concrete so the system above it stays bonded.

3

Three-Coat Flake Polyaspartic System

Three coats of polyaspartic build the floor, with colour flake broadcast for texture and colour and a clear polyaspartic topcoat to seal it. Polyaspartic cures quickly, resists UV yellowing and stands up to hot tires, road salt and cleaning products. Learn about polyaspartic coatings.

Flake Finishes and Colours

Flake is the most popular garage finish because it is durable, slip-resistant and available in a wide range of blends, from black-and-white granite to royal blue. Full-flake broadcast provides maximum texture and coverage, while partial-flake and solid-colour systems offer a cleaner, more minimal appearance. Samples are reviewed on site so colours can be assessed under your garage lighting.

View all options on our epoxy colour chart, or ask about metallic epoxy for a decorative feature floor.

One-day installation without shortcuts. Most garages are completed in one working day. Because the slab is ground and repaired first, installation speed does not compromise adhesion.

Garage Floor Warranty

Our standard residential system is a three-coat flake polyaspartic system, which includes a 5-year warranty against cracking and peeling. Where a slab has moisture issues, we add an epoxy moisture vapour barrier (MVB) base coat beneath the three-coat system. This four-coat MVB system includes a 10-year warranty against cracking and peeling. Your written quote states which system and warranty apply to your floor. Warranty terms and exclusions apply.

Garage Floor Prices

Prices below are for our standard 3-coat flake polyaspartic system: diamond grinding, a base coat, a full flake broadcast and a clear polyaspartic topcoat, backed by a 5-year warranty.

Single-Car GarageUp to 240 sq ftStarting from$1,999.99+ HST
Double-Car GarageUp to 450 sq ftStarting from$2,999.99+ HST
Triple-Car GarageUp to 700 sq ftStarting from$4,799.99+ HST

Garage Floor Price Calculator

Select your garage size or enter the square footage to see your starting price with HST.

Garage size

Length × width of the garage floor in feet. A typical double-car garage is about 20 × 20 ft (400 sq ft).

For stem walls, cove base, repairs, porches and basements, use the full price calculator.

Single-Car GarageUp to 240 sq ft
Starting price
$1,999.99
HST (13%)
$260.00
Estimated total
$2,259.99

Standard 3-coat flake polyaspartic system with a 5-year warranty. Book online with a 10% deposit; the balance is due on completion.

Book This Package Online

Package prices apply to garages up to the sizes shown, with concrete slabs in good condition, including slabs with minor hairline cracks, and include one or two concrete entry steps. A garage between package sizes is priced as the package below plus $7.75 for each additional square foot, and garages over 800 sq ft are priced after a free site assessment. Extensive pitting, structural concrete repairs, and removal of existing coatings are priced separately.

Any additional work or upgrades, including stem wall coating, joint repairs, built-in staircases (including work under or around them), cove base, and our 4-coat system with a moisture vapour barrier and a 10-year warranty, will be reviewed during your site assessment and included in your written quote before work begins.

Book Your Garage Online Request a Free Quote

  • 5-Year WarrantyStandard 3-Coat Flake Polyaspartic System
  • 4.9 StarsFrom 119 Google Reviews
  • 500+ FloorsInstalled Since 2019

What Happens After You Book

  1. Book OnlineChoose your package and installation date, then reserve it with a 10% deposit.
  2. We Confirm the DetailsOur team contacts you to confirm the space, flake colour and preparation needed.
  3. Installed in One DayYour floor is ready for foot traffic after 24 hours and vehicles after 72 hours. The balance is due on completion.

Timeline and Pricing Factors

Most single and double garages are completed in one day. Cracked, oil-stained or uneven slabs may require additional repair time, which we identify during the site assessment. Every client receives a written quote. Pricing depends on:

  • The size of the garage in square feet
  • The condition of the concrete, including cracks, pits and old coatings
  • Full-flake, partial-flake or solid-colour finish
  • The topcoat system chosen
  • Extras such as cove base, built-in staircases, a workshop area or slat-wall storage

For more detail on what affects the price, read our epoxy garage floor cost guide.

Caring for Your Garage Floor

Epoxy floors are low maintenance. The following practices help maintain the finish through the winter:

  • Sweep or dust mop regularly to remove grit that can dull the surface
  • Rinse away road salt and slush residue in winter with warm water and a soft mop
  • Use a pH-neutral cleaner and avoid harsh solvents
  • Place mats or boards under jack stands and heavy tool chests
  • Clean up oil and chemical spills promptly

At the final inspection we confirm when the floor can take foot traffic and when vehicles can return. Cure times depend on the system and the weather.

Finish the Whole Garage

We also install slat-wall and storage systems to complete the garage. For basements and workshops, see our basement epoxy floors. For commercial garages and service bays, see our commercial epoxy flooring.

How it works

How We Install Your Garage Floor

Site Assessment

We measure the garage, assess the slab for moisture, cracks and existing coatings, and review colour and finish samples with you.

Diamond Grinding

The slab is ground with Husqvarna equipment to open the surface for bonding, with dust extraction throughout to keep your home clean.

Crack Repair and Moisture Control

Cracks, pits and spalls are filled and levelled. Where the slab has moisture issues, an epoxy moisture vapour barrier base coat is applied.

Polyaspartic Coats and Flake

The polyaspartic coats are applied and flake is broadcast by hand for even coverage and texture.

Topcoat and Walkthrough

A clear, UV-stable polyaspartic topcoat seals the floor. We complete a final inspection with you and provide care instructions.

Watch the Process

A Garage Floor Installation From Start to Finish

This video follows one of our garage installations in a single day. The slab is diamond ground with Husqvarna equipment and dust extraction, cracks and pits are repaired, and the base coat is applied before the flake is broadcast by hand. The floor is then scraped, cleaned and sealed with a clear polyaspartic topcoat.

  • Diamond grinding to a CSP 3–4 profile
  • Crack and surface repairs before coating
  • Full flake broadcast for even coverage and texture
  • Clear UV-stable polyaspartic topcoat

Book Your Garage Online

Client testimonials

Client Reviews

Client Testimonial

Hear From Larysa in Her Finished Garage

Larysa shares her experience with the installation, from the first day of preparation to the completed flake polyaspartic floor. Press play to watch with sound. Read Larysa’s case study.

Book Your Garage Online Request a Free Quote

★★★★★

"I recently had epoxy flooring installed in my garage and couldn't be happier with the results. The team was incredibly polite, professional, and respectful of my home. The finish is smooth, clean, and exactly what I envisioned."

S
Susannah GreenGarage Floor · Google Review
★★★★★

"I am ecstatic about the double garage floor restoration completed at my Oakville home. They exceeded my expectations from beginning to end of the one day project. Meticulous and fully competitive with other quotes."

J
Jo Ann MorelloOakville · Google Review
★★★★★

"I can’t recommend Adam and the Supreme team enough! They recently installed a flake floor in our garage, and it completely transformed the space. Everyone was professional and a pleasure to work with from start to finish."

L
Larysa NakonecznyjFlake Garage Floor · Google Review
Questions

Mississauga Garage Flooring FAQs

Are you based in Mississauga?
Yes. Supreme Epoxy is based at 975 Lakeshore Road East. We install garage floor coatings across Mississauga, including Port Credit, Lorne Park, Meadowvale, Streetsville and Malton.
Can you coat the garage floor in an older Mississauga home?
Yes. We diamond grind the concrete and repair minor cracks and pitting before applying the coating. We assess extensive pitting, structural repairs and existing coating removal during the site visit and quote that work separately.
When can I use my garage again?
With our standard flake system, you can walk on the floor 24 hours after the final coat and park vehicles on it after 72 hours.
How much does an epoxy garage floor cost in Mississauga?
Our standard 3-coat flake polyaspartic system starts from $1,999.99 for a single-car garage, $2,999.99 for a double-car garage and $4,799.99 for a triple-car garage, plus HST. Starting prices include slabs in good condition with minor hairline cracks. Extensive pitting, structural repairs, coating removal and upgrades such as the 4-coat moisture vapour barrier system are reviewed at the site assessment and included in your written quote.
Is epoxy a good choice for a Mississauga garage in winter?
Yes. A sealed epoxy and polyaspartic system keeps road salt, meltwater and de-icing chemicals on the surface instead of soaking into the concrete, and the floor wipes clean. Proper diamond grinding and slab preparation are what let the coating handle freeze-thaw cycles.
How long does a garage epoxy installation take?
Most single and double garages are finished in one day. Heavily cracked, oil-stained or uneven slabs can need extra repair time, and we flag that at the free site visit.
Will hot tires peel my epoxy floor?
A well-prepped floor with a polyaspartic topcoat resists hot-tire pickup. Peeling almost always traces back to poor preparation, which is why we grind the slab and test for moisture and contamination first.
Can you coat cracked or oil-stained concrete?
Usually, yes. We grind away surface contamination, fill cracks and pits with repair material before coating. Deep oil saturation or active moisture problems are assessed on site so we can recommend the right approach.
What is epoxy flake flooring?
Colour flakes are broadcast into the coating, then sealed under a clear topcoat. Our garage floors use a three-coat flake polyaspartic system, with an epoxy moisture vapour barrier base coat added when the slab has moisture issues. The result is a durable, slip-resistant, speckled finish that hides dirt and small imperfections better than a solid colour.
Do you offer free estimates and storage options?
Yes. We visit, measure, check the concrete and give you a written quote with no obligation. We also install slat-wall and storage systems so the garage works as well as it looks.
Service areas

Serving Mississauga and the GTA

Supreme Epoxy installs garage floors across Toronto and the Greater Toronto Area.

Book a Site Assessment

We measure the area, assess the slab, review samples and provide a written quote. Most garages are completed in one day.

Get My Free Quote