Supreme Epoxy
Home About Us
Services
Floor Coatings
Service Areas
Resources
Contact Call (437) 239-1165 Get a Free Quote

Case Study: Toronto Fashion Academy Gloss Epoxy Studio Floor

Why the Toronto Fashion Academy chose a 100% solids gloss epoxy floor for its studio: better lighting for photography, easy cleaning and a dust-free environment.

ClientToronto Fashion Academy
SpaceStudio and workspace
AreaApproximately 2,500 sq ft
SystemMoisture vapour barrier base coat with LabSurface LabPox 35 100% solids epoxy
ColourLight Grey, high gloss
Timeline2 days
PrioritiesLighting, cleanliness and dust control

The Toronto Fashion Academy is a working fashion studio. The space is used for photography for clothing brands and fashion shows, and it holds garments and equipment of high value. The academy chose a 100% solids gloss epoxy floor from Supreme Epoxy to support its work. Request a free estimate to discuss your project.

Why the Academy Chose Gloss Epoxy

The floor in a fashion studio does more than carry foot traffic. It affects how light behaves in the room and how clean the space stays. The academy chose a 100% solids gloss epoxy system for three main reasons:

  • Lighting for photography. The reflective gloss surface brightens the space and supports even lighting for photo shoots and shows.
  • Easy cleaning. A seamless, non-porous surface can be cleaned quickly, with no grout lines or open pores to hold dirt.
  • Dust control. Sealing the concrete eliminates the fine dust that bare concrete produces, protecting delicate fabrics and high-value items.
Toronto Fashion Academy studio floor by Supreme Epoxy
Toronto Fashion Academy | 100% Solids Gloss Epoxy

The Challenge

Moisture in the concrete slab was the primary concern. Moisture vapour moving up through a slab can cause a coating to blister and lose its bond, so it had to be addressed before the finish coat went down.

The System

The concrete was mechanically prepared to give the coating a strong bond. We then applied a moisture vapour barrier base coat at 15 to 20 mils and finished the approximately 2,500 sq ft floor with a Light Grey coat of LabSurface LabPox 35, a 100% solids epoxy. A 100% solids epoxy contains no solvents that evaporate as it cures, so the full thickness applied stays on the floor, producing a thick, durable film with a high-gloss finish. The installation was completed in two days.

The Result

The academy now has a bright, reflective studio floor that supports its photography work, is quick to clean and keeps dust away from garments and equipment. The same benefits apply to showrooms, galleries, retail spaces and any environment where appearance and cleanliness matter.

Floors for Studios and Showrooms

If your space is used for photography, display or clean work, the floor finish can make a measurable difference. Learn more about our commercial epoxy flooring, or book a free site assessment and we will recommend a system for your space.

Project work

More Case Studies

Request a Site Assessment

We measure the area, test the concrete and provide a detailed written quote.

Get My Free Quote